Connect Design Object to MC Package

Explanation

This activity is used to connect all relevant design objects within a MC package. See About Mechanical Completion and Commissioning for more information.

The design objects are connected to the MC Package by using the MC Package Consists of connection type. Since this activity is performed towards the end of the Asset Engineering phase, the design objects can be considered equipment objects at this stage. The IFS/Component Specification will later use these MC package design objects for generating a MC Package specification.

Prerequisites

• The design object class for the MC Package should be defined with the MC Package Consists of class relation and the design object class of the design object being connected to the Mc Package should be defined with the can be included in MC Package class relation.
• A MC Package needs to be created.

System Effects

A design object is connected to the MC Package. 

Window

Design Object Connections 

Related Window Descriptions

Design Object Connections

Procedure

1. Open the Design Object Connections window.
2. Click New.
3. In the Plant field, enter the plant for which the design object connection is being created or use the List of Values to select a suitable plant.
4. In the Object ID field, enter the identity of the MC Package from which the connection originates. Use the List of Values to select a suitable object. 
5. In the Object Connection Description field, enter the MC Package Consists of connection type description or use the List of Values to select this connection type.
6. In the Sort Order field, enter a number for the order in which design object connections will be displayed in the window.
7. In the Connected Object ID field, enter the identity of the design object to be included in the MC Package. Use the List of Values to select a suitable object.
8. Click Save.