Enter Parameter
Explanation
Use this activity to enter information on a parameter for the functional
or serial object. You can then enter measurements on the object, and in
this way, control preventive maintenance actions. You can enter previously
defined test points on the object, and then link one or several parameters to
them. The parameters can be used as criteria for generating PM actions.
Prerequisites
- Information on the test point must have been entered in the
Testpoints
tab.
- Information on the parameter must exist in
Maintenance
Basic
Data.
- Information on the unit must exist in
Maintenance
Basic Data.
System Effects
As a result of this activity, you can create criteria for condition-based PM
generation, by linking parameters to PM actions. You can also enter results of
measurements on object parameters.
Window
Serial Object
Functional Object
Related Window Descriptions
Serial Object
Serial Object/Parameters
Functional
Object
Functional Object/Parameters
Procedure
- Open the Functional Object or the
Serial Object window, click the
Parameters tab and
create a new record.
- In the Testpoint field, use the List of Values to select a
suitable value.
- In the Parameter field, use the List of values to select a
parameter to be measured.
- In the Unit field, use the List of Values to select a suitable
unit for the parameter.
- In the Criterion field, specify whether or not the
parameter will be used as a criterion in condition-based PM action.
- Save the information (F12).