Attach Maintenance Levels to Structure

Explanation

Use this activity to: 

• attach maintenance levels to maintenance structures - i.e., to dis-assembly or assembly structures - for a part.
• define for each attached maintenance level the set of components required to dis-assemble or assemble the part for which the structure is defined.

The maintenance level structure represents the set of all possible components and alternates that could be used to dis-assemble or assemble a part. For an attached maintenance level, some of the possible set of components may not be relevant.

Prerequisites

This activity has the following prerequisites: 

• Dis-assembly and/or assembly structures must have been created.
• Maintenance levels must have been created.
• Maintenance levels must be associated with the part for which the structure has been defined.

System Effects

As a result of this activity:

• Maintenance levels are attached to dis-assembly or assembly structures.
• The set of structure components for each maintenance level is defined.

Window

Maintenance Level Structure

Related Window Descriptions

Maintenance Level Structure

Procedure

1. Query the part, site, routing revision, routing type combination which identifies the maintenance structure to which you wish to attach maintenance levels.
2. Left-click in the Maintenance Level field.
3. Click New (F5). Enter the maintenance level you wish to associate with the maintenance level routing or click List of Values to select a maintenance level. If you enter a value for maintenance level, you must select a maintenance level that has been associated with the part.
4. Click Save (F12). The set of all possible structure components will be loaded into the table window.
5. Click the check box in the Included column to associate that component with the selected maintenance level.
6.  Click Save (F12).