Register Issue of Pallet Handled Parts

Explanation

Usually, the system automatically registers issues from inventory for customer orders or shop orders. If you need to enter issues of pallet-handled parts manually, it can be done in this window. However, the pallet status must be available, e.g., it cannot be reserved.

Prerequisites

• The pallet cannot be locked for counting.
• An inventory value must have been specified for the part (unless there is an override cost in the inventory part register).
• The part cannot be a blow-through or a phantom part (planning method T, O, or K).
• The current location cannot be an inspection location, shipment location, or arrival location for pallet-handled parts.
• The Inventory Location Type must be pallet buffer, pallet deep, or pallet.
• You cannot have the pallet reserved if you want to issue from it.
• The ownership type of the parts must be Company Owned or Consignment.

System Effects

As a result of this activity, the pallet is issued from stock.

Window

Issue Inventory Part

Related Window Descriptions

Issue Inventory Part
Issue Inventory Part/Pallet

Procedure

1. In the upper part of the window, either populate or query for the part number in question.
2. Optionally, you can add a note to be entered in this inventory transaction. You can regard this note as a means of indicating the person responsible for the transaction or its cause.
3. Select the Pallet tab. In the lower part of the window, you now can see one or several locations where your pallets are located.
4. Select one or several lines of the location from which you want to issue pallets and select Issue Pallet in the operations menu.
5. In the message box that appears, click OK.