Inspection Sign Off

Explanation

Use this activity to perform an inspection sign off for an operation subtask. This is compulsory in order to close a shop order where the Inspection Sign Off field has been set to Required. This procedure is normally performed by an inspector.

Prerequisites

• A work guideline of type Subtask must have been connected to the operation in the Shop Order Operation Work Guidelines window.
• The subtask must have been signed off.
• The operation must not be in status Planned.
• The shop order must not be in status Planned, Parked or Closed.

System Effects

The subtask will be inspection signed off using the current User ID and date/time.

Window

Shop Order Operation Work Guidelines
Shop Floor Workbench

Related Window Descriptions

Shop Order Operation Work Guidelines
Shop Floor Workbench/ Mtrl Guidelines

Procedure

From the Shop Order/Operation tab, Shop Order Operations Reporting/Operations tab and Work Center Operations Reporting/Operations tab:

1. Select the operation line, right-click and then click Work Guidelines.
2. Select the subtask you wish to sign off. Right-click and then click Inspection Sign Off.

From the Shop Floor Workbench/Mtrl Guidelines tab:

1. Select the appropriate operation.
2. In the Mtrl Guidelines tab, select the subtask you wish to sign off. Right-click and then click Inspection Sign Off.

Note: The inspection sign off can be revoked by right-clicking on the subtask and then clicking Revoke Inspection Sign Off.