Start Production

Explanation

This activity is used to register that a production has started on one or several operations. It is possible to register both labor and machine time.

The start time and the stop time of a setup will be recorded. The clocking sequence is a unique number that will be set for each line that is started. Same clocking sequence will be set for all operations that are started at the same time.

Prerequisites

• The status of the operation should not be Planned or Closed.
• The status of the shop order should not be Parked.
• To start labor time, a labor class must be connected to the operation in the Shop Order window.
• To start machine time, a valid resource must exist on the work center.
• If Reporting Mode has been set to Employee Reporting on the used site, at least one Employee must be entered in order to report labor time.

System Effects

• If the Machine Time check box has been selected, a Machine Clocking will be created and the start time recorded on it.
• If the Labor Time check box has been selected, one labor clocking will be created for each Employee that has been entered in the Employee list and the start time will be recorded on it. If no Employee is entered, one clocking record will be created.
• The start time will be recorded on the clocking. The clockings can be viewed in the Clockings tab.
• The operation will be marked with a cogwheel symbol to the left in the operation list.
• If the operation was marked with a exclamation mark for interruption, this symbol will be now removed.
• The status of the operation is set to In Process.
• If an ongoing setup activity exists, it will be stopped.
• If the employee or team was running an indirect job this will be stopped.
• If a machine clocking is already running on the resource where this one is started and the Allow Concurrent Operations check box in the Work Center window is cleared this machine clocking will be stopped.

Window

Shop Floor Workbench

Related Window Descriptions

Shop Floor Workbench
Start Production

Procedure

1. Open the Shop Floor Workbench window. If Reporting Mode has been set to Employee Reporting on the used site an employee or team must have been entered in the Enter As dialog box.
2. Click Refresh. The operations will be displayed according to the filter that is being used.
3. Select the operation lines for which you wish to start production, and click Start Production.
4. The Start Production dialog box will be opened. Based on the data entered in the Shop Order window, Machine Time and Labor Time options will be selected. You can change the values if you want to.
5. Choose the resource which on the operation will run in the Resource list.
6. If run in Employee Reporting mode, enter the employees that will work with the operation in the Employee table. If run in Anonymous mode; enter the crew size manually. If a team is entered in Shop Floor Workbench, the employees currently in the team will be displayed and may not be changed.
7. Click OK. The start time can be viewed in the Clockings tab.