Issue Components Automatically

Explanation

This activity is used to issue material automatically for a shop order. When this activity is performed, the system will select the inventory location. During the automatic issue of parts, the supply codes relating to the shop order material lines are taken into consideration. If the supply code is Inventory Order, only the standard inventory will be available for issue. If the supply code is Project Inventory, only the project inventory for the project connected to the shop order will be available for issue. If components are available, the parts belonging to the connected project activity will be issued.

You can issue material for an entire shop order, perform a partial issue or only issue reserved material. These options can be combined as per your requirements.

Note: If the catch unit is enabled for the part, it will only be possible to issue components automatically once the entire quantity in the inventory location is issued. If the entire quantity in the inventory location is not issued, a message will appear requesting you to enter the catch unit. In such situations you need to perform the issue of components manually. For more information refer to the online help file: Issue Components Manually.

If this is the first issue of material for the selected assembly shop order, the system will automatically run the Perform Preliminary Conformance Check function, thereby creating (or updating) the expected on-log with the structure for the level below. For more information on this function, refer the online help file: Perform Preliminary Conformance Check.

Prerequisites

• All disassembly and repair orders connected to the assembly shop order must have been completely received.
• Likewise, all disposition orders connected to the disassembly order in a shop visit must have been completely received.
  (If an order on the level below is not finished, some serials may not be reserved. This may cause the expected on-log to be updated with incomplete information.) 
• The shop order must have been released and there must be enough unreserved material in stock. Note: it is not necessary to reserve the shop order.

System Effects

The following system effects will take place as a result of this activity:

• Components are issued from inventory.
• Each shop material allocation row receives the status Issued.
• The status of the shop order will be set to Started.
• The system will create WIP postings (Work In Progress postings) for the components that have been issued.
• The system will locate and issue components according to the FIFO algorithm (First In First Out algorithm).
• If the shop order was created from Project Delivery, the project delivery structure will be updated with the quantity issued.
• If the catch unit is enabled for the part, the system will update the Catch Qty Issued field in the Shop Order/Material tab with the corresponding catch unit value.
• When automatically issuing material for a shop order with a connected supply pegging, the issue will reduce the pegged quantity by the same quantity that was issued. Note: If more than one supply is pegged to the same demand, you will be prompted to manually adjust peggings prior to performing the issue of material.
• The expected on-log is created [or updated] with the structure for the level below.
• Log entries are generated each time the Perform Preliminary Conformance Check function is run (i.e., either manually or automatically). These entries can be viewed in the MRO Shop Order/Prelim. Conformance Log tab, CAMRO Interim Order Structure/Prelim. Conformance Log tab or the Preliminary Conformance Log window.

Window

Shop Orders
Shop Order
MRO Shop Order

Related Window Descriptions

Shop Orders
Shop Order
MRO Shop Order

Procedure

1. Right-click and then click Issue.
2. If you want to issue only reserved material, select the Issue All Reserved Material check box under Criteria for Issue.
3. If you want to issue all material for the shop order, including non-reserved material, select the Also Issue Nonreserved Material check box. When you select this check box, the Issue All Reserved Material check box is selected automatically.
4. If you want to perform a partial issue for the shop order, enter the quantity of the parent part that you want to manufacture in the Parent Quantity to Issue field. The specified quantity is issued first from reserved material, and then any remaining quantity is issued from non-reserved material. To issue all material, leave this field blank.
5. Click OK.