Add Separate and Route Standard Jobs

Explanation

Use this activity to add separate and route standard jobs to the PM actions that are created for the object. Standard jobs can be connected using one of the following methods: 

• Connect individual standard jobs.
• Connect standard jobs based on the categories to which they belong. The categories are: Object Category, Object Type, Type Designation, and Part Number. 

Note: Standard jobs that are connected to the job program will automatically be displayed when a job program is retrieved to the window. 

Prerequisites

• Separate and route standard jobs must have been defined in IFS/Preventive Maintenance. The standard jobs defined should be active and valid.
• Job programs must have been defined, and the status must have been set to Active in IFS/Preventive Maintenance, Job Programs.  

System Effects

• The standard jobs will be connected to the PM action at the time of generation. You can view the connection on the Separate PM Action/Jobs tab and the Route PM Action/Jobs tab.
• For standard jobs that are connected to the job programs, values will appear in the Job Program ID and the Job Program Revision fields of the Separate PM Action/Jobs tab and the Route PM Action/Jobs tab. 

Window

Add Job Program to Object

Related Window Descriptions

Add Job Program to Object 
Add Job Program to Object/Separate 
Add Job Program to Object/Route 
Add Standard Jobs by Category

Procedure

Connecting individual standard jobs:

1. Open the Add Job Program to Object window and define the header details.
2. Click the Separate tab to add separate standard jobs, or the Route tab to add route standard jobs.
3. Click on the upper table and create a new record.
4. Enter the standard job ID and revision in the relevant fields. Repeat steps 3 and 4 as often as required.
5. Save the information (F12).

Connecting standard jobs based on categories:

1. Open the Add Job Program to Object window and define the header details.
2. Click the Separate tab to add separate standard jobs, or the Route tab to add route standard jobs.
3. Right-click on the table and then click Add Std Jobs by Category. The Add Standard Jobs by Category dialog box opens.
4. Enter values in one or more of the following fields: Object Category, Object Type, Type Designation, and Part No. Click List to select appropriate values.
5. Click Search. The results will be displayed in the table below.
6. From the available list, select the standard jobs you want to add by selecting the Select check box.
7. Once the selection has been made, click Return.