Enter Measurement

Explanation

Use this activity to enter the value that is obtained during the measurement of the object. A measurement is carried out on a parameter that has previously been entered for the object. You can also enter whether the measurement has been carried out on a special test point defined for the object.

Prerequisites

Before the measurement is entered, the following must have been completed:

• A test point and a parameter must have been linked to the object in the Serial Object or Functional Object window in IFS/Equipment.

System Effects

As a result of this activity, an object parameter gets updated with the last measured value. Furthermore, if the result of the measurement falls outside of the limits, it will also be displayed under the PM action that the parameter is linked to.

Window

Measurements
Single Page Report In Work Order

Related Window Descriptions

Measurements
Single Page Report In Work Order

Procedure

Use the following procedure to enter the measurement for the object:

1. Use the New function.
2. In the Object ID field, use List of Values to select the equipment object on which you want to enter the measurement.
3. In the Site field, use List of Values to select a suitable value.
4. In the Test Point field, use List of Values to select a value. The test point must have been entered for the object in IFS/Equipment.
5. In the Parameter field, use List of Values to select a value. The parameter must have been entered for the object in IFS/Equipment.
6. In the Measured Value field, enter the measured value of the parameter.
7. Save the information.

Use the following procedure to enter the measurement for an object that is connected to a work order:

1. Open the Single Page Report In Work Order window.
2. Query for the work order (F3).
3. Click Measurements.
4. Enter measurements on the table as required.
5. Save the record (F12).